A Guide to Purchasing the Right Architrave
An architrave implies the internal molding fitted around a widow or a door frame. They help in concealing rough surfaces or messy door joints. They are used as trim when the joints meet the floor or walls. Architraves usually come in a vast range of finishes and materials. For instance, they tend to be popular in solid oak and MDF and designs such as conventional or modern. By reading the publication below, you will be able to learn detailed information about the architrave and its uses.
Consider the Width
If you want to begin a new installation after removing an existing architrave door, you most likely will not need to match the width of the previous architrave. Besides, if you intend to leave some of the formerly installed architraves, it would help if you select the exact width of the architrave to match your skirting. Also, it will help to ensure consistency in your entire home. It is significant to keep in mind how close your door frames are to the walls. If your shelves and door are too tight, evaluating if your preferred architrave is the right fit is essential. For instance, the most common architrave comes 70mm wide, 90mm wide, and 120mm wide.
Check the Depth
It is crucial to note that the architrave is thicker than skirting boards. This helps achieve a straightforward transition from one point to another. In modern homes, architraves and skirting installation can be done in one thickness to enable flushing at the joint. However, this can also be effective where the walls are square. This may be unpopular when it comes to traditional properties. But you need to settle on plinth blocks since they significantly create a better transition between architraves and skirting. Remember that a plinth block will be thicker than the skirting and architraves. After the installation, they help to build a more conventional feel. For instance, the thickness is usually 15mm, 18mm, and 25mm, respectively.
Consider the Length of the Architraves
When buying a door architrave, it is important to consider its length. The process can be a bit challenging. For instance, if you are looking to place an order length, selecting from the first given options in millimeters is advisable. Moreover, if you buy in sets, it would be great to consider choosing from the last options. For instance:
- The 2240mm length is considered the shortest length in the market and the most popularly purchased product size.
- The 3050mm length is best for standard-sized doorways since you can get one head on top of the door frame, one side of the door frame, and out of a single length.
- The 4200mm length is considered the most extended length of an architrave.
Finally, you will get a single and double set with various features.
Consider the Finish
Various finishes are available, and this depends on your budget and the amount of DIY you are looking to do. For instance, if you pick an unprimed architrave, your skirting boards may not require any finishing. They may arrive in their original taste. Therefore, getting a suitable architrave to match your skirting boards is crucial.
Written By (Helen Harry)