Personal Protective Equipment (PPE)- Basic Safety Requirements
A construction site is an avenue full of potential life-threatening hazards. Every year, the construction industry accounts for the highest statistics of fatal injury cases. There is still a threat of work-related accidents among construction workers even after complete workplace control and risk assessments. That is why safety is also an important issue for construction business owners as well.
In the event of a mishap, wearing PPE can minimize any injury or damage to a construction worker. This is why workers must use the appropriate PPE required in their workplace. An individual must securely wear protective equipment to avoid further danger. Take a quick look at the basic PPE required in every construction site below:
Legal Aspect Of Requiring PPE In Construction
The OSHA (Occupational Safety and Health Administration) is responsible for imposing construction standards and guidelines. If an injury occurred due to a construction company’s failure to provide PPE to its employees, they could be reported to the OSHA and face lawsuits. A lawsuit will then subject the company to file for a settlement.
Thus, picking the appropriate and reliable PPE set must be a priority when running a construction firm. Ensure safety in the work environment and browse for the best quality of PPE equipment here.
Head protection items are essential in most construction sites. As an important Personal Protective Equipment, it protects construction workers against impact and penetration hazards that might cause head injuries. Each protective headgear provided by the construction company must meet ANSI standards first. Listed are some of the safety helmets that every construction worker need:
There are two types and three classes of Hard hats, i.e., Type I and II, Class E, G, and C. Type I is to reduce the impact from a blow on top of a person’s head. Type II intends to protect the other sides of the head from hazards such as falling nail guns and hammers.
Formerly categorized as Class A, Class E protects the head against low-voltage electrical conductors. Previously known as Class B, Class G are used in electrical work exposed in high-voltage electrical conductors. Class C does not offer electrical protection.
Bump hats should be used when working in low overhead areas. It is because, compared to hard hats, bump hats do not protect a person’s head from falling or flying debris. But bump hats are essential protection from a collision with exposed objects such as beams and pipes.
Face And Eye Protection
When working with hazards involving metal or chemical splashes, radiation, gas, dust, and projectiles, one should wear gears to protect both face and eyes. It should be task-suitable and has a correct fit to ensure the worker’s safety. The available protective face and eye gears are the following:
- Face Screens
- Safety Spectacles
A high level of sound exposure can contribute to an excessive amount of ear damage to a person. It might cause permanent ear injury if not taken seriously by either the construction company or the worker. It is best for construction workers to use the appropriate protective ear equipment to protect themselves from workplace noise hazards.
If one is careless in using their protective ear gear, it might compromise an individual’s work condition and safety. And for this reason, companies should then brief their employees on properly wearing the provided ear protection. The following items are ear protection that every construction worker should wear:
- Ear Muffs
- Ear Plugs
- Canal Caps
Lung protection devices are among the important personal protective equipment. Construction workers often encounter workplace hazards such as vapors and dust, so using lung protection is a priority. When choosing the right protective lung protection equipment, it is important that it appropriately fits the user.
One must strictly follow the above measures to avoid possible threats of respiratory damages when a seal is prematurely formed. Included are the examples of ear protection that construction workers can use in construction sites:
- Fresh-air Hose
- Breathing Apparatus
- Filtering Facepieces
Leg And Foot Protection
There is the expectation that construction workers always wear the prescribed protective footwear on site. The bones in a person’s foot are brittle, thus prone to more damage. In any case of muscle or tendon injury will restrict an individual’s movement for quite some time. This incident might delay the job.
That is why wearing the appropriate foot protection must be properly imposed by the construction company at all times. The owner should provide free protective footwear to its employees as long as they look after it with care. A list of ideal protective footwear equipment are as follows:
- Steel Toe Caps
- Steel Midsole Protection
Safety in the workplace is and will always be a priority. And wearing the appropriate personal protective equipment can help achieve an accident-free work environment. It is the responsibility of both the construction owner and worker to impose risk regulation and follow safety guidelines. It is best to work as a team to win as a team.